Reviewed and updated October 22, 2026 by the SearchSystems.net editorial team. Every fact on this page was read that day from the Utah Driver License Division's and Division of Motor Vehicles' own pages and office directories and, where named, the state's portals and the Utah Code, and the official page each fact came from is linked where it appears.
Utah CDL applicants must coordinate vehicle class, medical certification, required training, examinations, and current issuance restrictions.
In this guide: Utah commercial licenses: Determine the commercial authority the job requires, Utah commercial licenses: Confirm age, experience, and the available application route, Utah commercial licenses: Put medical certification and documents in place first, Utah commercial licenses: Prepare for English knowledge examinations, Utah commercial licenses: Hold the permit and complete applicable entry-level training, Utah commercial licenses: Match the test vehicle to the license being sought, Utah commercial licenses: Maintain the credential after issuance, Utah commercial licenses questions for 2026
Utah commercial licenses: Determine the commercial authority the job requires
Begin with Utah's CDL information page and identify the actual vehicle, passengers, and cargo involved. Class A generally covers qualifying combinations rated at least 26,001 pounds with a towed unit rated over 10,000 pounds. Class B covers qualifying heavy single vehicles and combinations with a lighter towed unit. Class C addresses vehicles below those weight classes that carry at least 16 people including the driver or require hazardous-material placards. The desired job title alone does not determine the license class.
Use the vehicle rating labels and the planned combination rather than an estimate of the empty truck's weight. A business owner may also have motor-carrier obligations below the CDL threshold. UDOT's motor-carrier applicability guidance separates those questions. Obtaining a CDL does not register the truck, supply operating authority, or authorize an overweight load. Keep the driver's credential application distinct from the carrier and vehicle requirements so none is overlooked when work begins.
Utah commercial licenses: Confirm age, experience, and the available application route
The original CDL instructions require an applicant to be at least 18 and to have held a Class D license for one year. Applicants younger than 21 are restricted to intrastate operation and cannot obtain the hazardous-materials, passenger, or school-bus endorsements described by DLD. A valid CDL from another U.S. state can be presented for transfer and must be surrendered; a foreign commercial license is not accepted as equivalent transfer proof under the application instructions.
Current availability also matters. The non-domiciled application page continues to announce that Utah paused issuance of non-domiciled CDLs on January 20, 2026, until further notice. Do not pay for training on the assumption that a displayed application button means issuance has resumed. The 2026 Driver Handbook distinguishes the non-domiciled category from U.S. citizens, nationals, and permanent residents. Confirm the appropriate document category with DLD when the brief web descriptions do not clearly match the applicant's status.
Utah commercial licenses: Put medical certification and documents in place first
Before the CDL appointment, arrange the required examination with a qualified medical examiner. The current original application page says the examiner should submit the Medical Examiner's Certificate electronically and directs applicants to verify that it has been added to the driving record. A paper copy carried to the office is useful for reference but should not be assumed to replace the required electronic record. Resolve an identification mismatch with the examiner before it becomes a testing-day delay.
Complete the CDL medical self-certification form for the intended type of operation. The category explanation distinguishes interstate from intrastate work and excepted from non-excepted operation. Choose the category supported by the actual work, not simply the one that appears to require fewer documents. Gather the identity, Social Security, residence, and legal name evidence specified by the document instructions, along with the current driver license.
Utah commercial licenses: Prepare for English knowledge examinations
Utah administers CDL examinations in English without translation materials. The 2026 DLD legislative update also requires applicants to attest to English proficiency, covering public conversation, road signs and signals, official inquiries, and entries in reports or records. That requirement took effect May 6, 2026. The commercial knowledge-test page specifies closed-book, multiple-choice tests requiring 80 percent to pass. The general test has 50 questions, the Class A combination test has 20, and the air-brake test has 25. Additional endorsement examinations depend on the intended work. Study the applicable sections of the Utah CDL manual instead of assuming an ordinary-license practice test covers commercial inspection and equipment knowledge.
The application charge includes the core knowledge tests, with two attempts before the additional test fee described by DLD. Endorsement tests have separate charges and attempt limits. Check the published fee schedule when budgeting for the full process: the original CDL application is $52, ordinary endorsements are generally $9 each, and the state skills examination costs $78. School tuition, private testing, security screening, and equipment rental can be separate expenses rather than part of that state application charge.
Utah commercial licenses: Hold the permit and complete applicable entry-level training
Passing the required knowledge examinations leads to a commercial learner permit valid for 180 days. Utah requires holding it for at least 14 days before the skills test. During that interval, practice must comply with the permit's conditions and supervision requirements; the permit is not authority to begin unsupervised commercial employment. Plan training and the test around the printed expiration so a permit lapse does not interrupt the sequence.
DLD's CDL information explains the entry-level driver training requirement for first Class A or B applicants, Class B-to-A upgrades, and first passenger, school-bus, or hazardous-materials endorsements. Theory may be completed before the permit, while behind-the-wheel instruction requires the permit first. Confirm that the provider's completion is available to the licensing system before scheduling the relevant examination. Training and a skills test serve different purposes, even when one school offers both services.
Utah commercial licenses: Match the test vehicle to the license being sought
The skills-test instructions describe the vehicle inspection, basic controls, and road portions. For testing at DLD, the applicant must provide a registered, road-ready vehicle appropriate for the requested class. Transmission and braking equipment can affect restrictions on the resulting license. Someone who expects to drive a manual tractor-trailer should investigate the consequences of testing in a different configuration before reserving a vehicle.
An approved third-party tester is another option, with charges set by the tester. Ask whether a suitable vehicle is supplied, which classes can be tested, and how cancellation or retest costs work. The tester submits results electronically, but the applicant still completes issuance through DLD. A passing test certificate or school completion does not by itself become the commercial credential carried on the road.
Practice the current basic-control exercises described by DLD: forward stopping, straight backing, forward offset tracking, and reverse offset backing. The agency publishes an eight-error-point maximum for that portion and a 30-error-point maximum for the road portion. Understanding the required maneuvers helps the applicant prepare deliberately rather than discovering an unfamiliar exercise after arriving with an expensive rented vehicle.
Utah commercial licenses: Maintain the credential after issuance
An ordinary Utah CDL is issued for five years, with a temporary credential available after the required steps are completed. Check the class, endorsements, and restrictions before accepting a work assignment. Utah's commercial licensing law prohibits operation when the commercial privilege is disqualified, suspended, or otherwise invalid, or when required medical certification is missing. A physical card with a future expiration does not resolve those separate conditions.
The renewal process opens six months before expiration and requires an office visit. It specifies full CDL knowledge and skills testing when the license has been expired more than six months, and recurring written tests for school-bus and hazardous-materials endorsements. Maintain medical certification on its own schedule rather than waiting for the five-year license renewal. The two expiration dates can differ substantially.
For a changed address, the commercial address instructions require appearing in person for a new credential within 30 days. For a missing card or an update outside the renewal window, use CDL replacement guidance. Before returning to commercial work after any licensing problem, check DLD status and any applicable Clearinghouse restriction. The operating authority must match both the job and the current record, not only the qualifications earned when the CDL was first issued.
Utah commercial licenses questions for 2026
What age and prior-license experience does Utah require for a CDL application?
DLD requires applicants to be at least 18 and to have held a Class D license for one year.
How long must the Utah commercial permit be held before skills testing?
The minimum holding period is 14 days, together with any required entry-level training and other eligibility conditions.
Are Utah CDL knowledge tests open-book or translated?
Commercial knowledge tests are closed-book and administered in English without translation materials.
Is Utah currently issuing non-domiciled CDLs without restriction?
DLD continues to post its January 20, 2026 pause on non-domiciled CDL issuance until further notice.
Does a private tester issue the final Utah CDL?
The tester submits examination results electronically, while DLD completes the licensing transaction after all requirements are satisfied.
Can an ordinary Utah CDL renewal be completed entirely online?
Utah requires CDL holders to use the in-person renewal process rather than ordinary online renewal.
Written by SearchSystems.net from the Utah Driver License Division and Division of Motor Vehicles pages linked in each section, on dld.utah.gov and connect.udot.utah.gov, le.utah.gov, read on October 22, 2026.
More Utah DMV guides
The other Utah DMV guides, 52 of them:
Licenses and IDs 13 guides
- Choose and Maintain a Utah Driving Credential
- Prepare a Complete Utah License Application
- Renew a Utah License Through the Correct Channel
- Obtain a Replacement Utah Driving Credential
- Getting and Maintaining a Utah ID Card
- Check and Obtain a Utah REAL ID Credential
- Using Utah digital identification during the 2026 transition
- Updating Utah Driver and Vehicle Records After a Change
- Preparing Utah Identity, Status, and Residence Evidence
- Applying for and Renewing a Utah Limited-Term License
- Handling Utah licenses and vehicles during military service
- Adding Utah Motorcycle Riding Authority
- Applying for and Maintaining a Utah Driving Privilege Card
Teens, seniors and testing 6 guides
Vehicles, titles and plates 11 guides
- Build the Correct Utah Title Record for a Purchase or Ownership Update
- Complete a Utah Vehicle Registration From the Ownership Papers Forward
- Choose, Display, and Transfer a Utah Plate Under the Current Rules
- Document a Utah Vehicle Sale and Close the Seller’s Registration Record
- Transferring a Utah Vehicle After an Owner Dies
- Utah Options When the Vehicle Title Is Unavailable
- Documenting Utah Vehicle Lien Sales
- Checking a damaged Utah vehicle’s title and permitted use
- Importing and Titling a Vehicle in Utah
- Documenting a Utah kit, reconstructed, or specially constructed vehicle
- Titling and Registering a Motorcycle in Utah
Registration, fees and inspections 9 guides
- Renew a Utah Registration With the Correct Address, Inspection, and Payment
- Order the Specific Utah Registration Item That Is Missing
- Reading a Utah driver or vehicle fee estimate
- Paying the right Utah agency and documenting a refund claim
- Maintain Utah Auto Coverage and Resolve Insurance Verification Problems
- Applying for Utah accessible parking credentials
- Coordinate Utah Registration and Insurance Before Storing a Vehicle
- Choosing Utah’s Mileage-Based Electric Vehicle Charge
- Meeting Utah County Emissions Requirements
Suspensions, DUI and records 6 guides
- Understanding the separate parts of a Utah DUI license action
- Requesting and preparing for a Utah DLD DUI hearing
- Restoring a Utah driving privilege after suspension or revocation
- Managing Utah points before a license action
- Choosing and requesting the right Utah driving record
- Obtaining Utah collision records and using them accurately
Commercial, trucks and special vehicles 6 guides
- Selecting and Maintaining Utah Commercial Endorsements
- Maintaining Utah Commercial Medical Qualification
- Preparing to Operate a Truck in Utah
- Titling and Registering Utah Work Vehicles and Trailers
- Prepare a Utah Vessel for Registration and Lawful Launching
- Prepare the Utah OHV and Each Rider Before Reaching the Trail
Offices, online services and new residents 1 guide
The public records that sit beside this page, on SearchSystems: checking a license in Utah, Utah background checks and the Utah business search.
