SearchSystems Editorial

Reviewed and updated October 21, 2026 by the SearchSystems.net editorial team. Every fact on this page was read that day from the Louisiana Office of Motor Vehicles' own pages, its Office List data and its published policies, and the official page each fact came from is linked where it appears.

Determine the correct construction category

The kit car policy describes a vehicle assembled from a kit combined with a preexisting chassis or powertrain. The assembled vehicle policy addresses major components assembled by someone other than the manufacturer, potentially including new parts. These categories have related but different documentation and identification procedures. Describe the build accurately before ordering parts or arranging an inspection. A replica appearance does not settle the classification, and using a donor vehicle's name in conversation does not establish that its original title can remain unchanged after the construction is completed.

Back to the topics

Preserve component records as the project develops

The assembled policy requires receipts for parts and additional evidence according to where major components originated. Keep a build file from the first purchase, identifying the seller, date, component, and donor information where available. Major components include more than the engine and frame; the policy also lists transmission and specified body portions. A folder of receipts collected after the vehicle is complete may be difficult to reconstruct. Request adequate documents while the seller can still identify the part and the vehicle from which it came, especially for used structural components.

Back to the topics

Obtain the dismantling evidence for donor parts

Under the permit-to-dismantle policy, a donor vehicle's original permit accompanies a transferred frame, while other major parts require the specified supporting copies and sale evidence. The assembled policy distinguishes parts obtained from licensed dismantlers from those obtained from individuals. Ask which documents accompany the component before paying for it. A photograph of a donor car does not demonstrate that its parts were lawfully released through the required dismantling process. Maintain the records in a way that lets the examiner connect each major part to its source without relying on the builder's memory.

Back to the topics

Keep the manufacturer's kit documents intact

For a new, previously unregistered kit car, Louisiana requires the manufacturer's certificate of origin, itemized invoice, and part receipts, along with the other applicable application materials. A conversion by the same owner also requires the kit's assigned ownership document, invoice, and the dismantled vehicle's title under the kit policy. Avoid separating these originals from the project when components are moved between workshops. The general ownership requirements still matter because the finished vehicle's eligibility depends on a documented acquisition history, not solely on whether the builder can demonstrate that the completed car operates.

Back to the topics

Complete the specialized disclosures and declarations

The kit and assembled policies call for the disclosure form DPSMV 1804 and an assembled-vehicle affidavit addressing roadworthiness. They also require a sworn safety-standard statement tied to the date assembly was completed. Read those declarations carefully before signing. An owner should have a basis for the assertions about the completed build rather than treating them as routine boilerplate attached to a receipt. The vehicle application policy governs DPSMV 1799, while the specialized declarations explain the construction facts and permanent branding that ordinary purchase paperwork would not otherwise disclose.

Back to the topics

Use the correct State Police inspection sequence

New kit cars and conversions require the inspection described in the kit policy through State Police Towing and Recovery. Used kit cars or interstate transfers have their specified qualified-officer inspection route. For an assembled vehicle, OMV reviews the documents and issues a referral before the builder may schedule the VIN assignment appointment. Do not bypass that referral by arranging an ordinary inspection first and assuming it completes the assembled-vehicle procedure. The sequence matters because State Police must examine the appropriate component and identification questions for the category OMV is actually processing.

Back to the topics

Follow the newer electronic inspection procedure

The current physical inspection policy requires authorized agencies to enter inspections in the State Police database. The customer no longer receives the former paper inspection form, and DPSSP 3515 is not accepted. Older topic sheets can still refer to that document, so coordinate with the qualified inspector using the current process. Keep the appointment and vehicle identifiers available for OMV's verification. A printed repair invoice or a private vehicle appraisal does not supply the electronic law enforcement inspection record required to support a specialized title application.

Back to the topics

Understand the assigned identity and lasting brand

For an assembled vehicle, State Police assigns the VIN, the year comes from the physical inspection, and the make is recorded as assembled under the applicable policy. The title carries the Assembled Vehicle designation on later records as well. Kit cars similarly retain their Kit Car designation. Plan the build's future sale and insurance description around that permanent classification. A finished vehicle that resembles a particular historic model does not thereby become an original production example for Louisiana title purposes, and later repainting or mechanical improvement does not remove the construction designation.

Back to the topics

Obtain insurance that describes the construction correctly

The specialized policies require insurance when a plate is requested and specify that the card clearly identify the vehicle as assembled. Explain the build to the insurer before requesting proof for OMV. The general insurance evidence policy describes the acceptable proof framework, but a generic card using only the donor's former identity may not reflect the completed vehicle. Confirm the assigned VIN and description after the identification process. The objective is one consistent identity across the inspection record, title application, policy, and eventual registration rather than different names for the same custom build.

Back to the topics

Address emissions requirements in the relevant parishes

The assembled policy requires the specified emissions inspection form for vehicles domiciled in a nonattainment area when emissions testing applies. It identifies Ascension, East Baton Rouge, Iberville, Livingston, and West Baton Rouge parishes. Review the 2026 inspection law and effective-date provisions alongside the construction policy because emissions-program changes have conditions distinct from the general statewide transition. Do not assume that a custom build or a change in ordinary inspection-certificate enforcement eliminates the applicable emissions requirement. Arrange the challenge-station documentation identified by the assembled procedure when it is required for the vehicle.

Back to the topics

Keep other unusual construction routes separate

A glider kit uses its own frame with specified powertrain components from existing vehicles and follows its own initial-file requirements. A homemade or shop-built trailer has another identification and documentation procedure. A repaired total-loss vehicle belongs under the reconstructed salvage rules when that is the actual situation. Classifying every modified vehicle as a kit car can produce the wrong application and leave essential donor or damage records missing. Explain what was changed, what remained, and what documents exist so the specialized unit can identify the appropriate construction or reconstruction category.

Back to the topics

Account for financing, mileage, taxes, and charges

Include the applicable security agreement under the lien recording rules when the project or finished vehicle is financed. Complete any mileage disclosure required by the odometer policy and the specialized checklist. The vehicle tax policy and fee schedule govern relevant financial components, but a kit invoice, donor purchase, and finished-vehicle sale should not be conflated without review. Preserve paid-tax evidence and component invoices. A carefully itemized file lets OMV determine which charges apply to the particular initial build or later transfer instead of relying on an estimate for a standard factory automobile.

Back to the topics

Submit the initial file to the specialized unit

The current kit and assembled policies direct initial applications to OMV's Specialized Vehicle Unit at Post Office Box 64886 in Baton Rouge, Louisiana 70896. Later transactions may be handled through the permitted OMV or public tag agent channels. Organize the initial submission by ownership, component history, declarations, photographs, inspection, and financial evidence. Keep copies before mailing originals. If OMV requests additional material, respond to the specific deficiency rather than resending the same incomplete packet. For assembled vehicles, the completed identification and inspection evidence must be returned through the process before title issuance is finished.

Back to the topics

Preserve the build history after registration

Use the official service directory for later assistance, while keeping the specialized unit's correspondence with the permanent vehicle records. Inspect the issued VIN, year, make, owner, and brand as soon as the title arrives. Retain the component receipts and signed disclosures for a later purchaser or insurer. A future ownership transfer should accurately describe the vehicle's kit or assembled status rather than presenting its visual resemblance as its legal identity. Complete documentation remains valuable after the build is roadworthy because the title classification and component history continue with the vehicle.

Back to the topics

Frequently Asked Questions

Are a Louisiana kit car and an assembled vehicle always the same category?
The state defines them separately and applies related but distinct construction, document, and identification procedures.

Can an assembled-vehicle builder schedule VIN assignment before OMV reviews the file?
The assembled policy requires an OMV referral before the builder makes the State Police VIN-assignment appointment.

Does the kit or assembled designation disappear after a later sale?
Louisiana's policies retain those designations on subsequent title records.

What inspection paper should a builder obtain under the current procedure?
Qualified officers enter the inspection in the State Police database; the former DPSSP 3515 paper form is no longer accepted.

Can a donor vehicle receipt replace every component record?
Component documentation depends on the source and type of part, including applicable dismantling evidence, so keep the records required for each major component.

Where is an initial Louisiana kit or assembled application sent?
The current policies direct the first application to OMV's Specialized Vehicle Unit, with later transactions eligible for the permitted local processing channels.

About this page

Written by SearchSystems.net from the Louisiana OMV pages linked in each section, on public.powerdms.com and legis.la.gov, expresslane.la.gov, offices.omv.la.gov, read on October 21, 2026.

Back to the topics

More Louisiana OMV guides

The other Louisiana OMV guides, 52 of them:

The public records that sit beside this page, on SearchSystems: the Louisiana property records guide and liens and deeds recorded in Louisiana.